The HP ProLiant DL170h G6 Server extends HP ProLiant G6 innovation as part of the HP ProLiant DL1000 Multi Node Series. The DL1000 consists of up to four independent DL170h G6 servers in the 2U HP ProLiant h1000 G6 Chassis. The servers share power supplies and fans, providing greater power and cooling efficiencies. The DL1000 was designed to double the density to maximize data center floor space, increase performance while lowering energy consumption and provide flexible configurations that fit into existing industry standard racks. The DL170h G6 includes two Intel two processors with 16 DDR3 DIMM sockets. The DL170h G6 provides all of the features expected in an enterprise server, including essential management features (LO100i) and Easy Setup CD for rapid deployment, but at a low cost. Highly flexible, the DL170h G6 has different drive cage, power supply and IO riser options that enable you to optimize the server for specific applications.
Функции:
•
More affordable compute power: Lower acquisition cost vs. standalone rack mount servers; Operational savings due to lower power consumption; No startup investment in infrastructure required
•
Better utilization of space in the datacenter: Double the compute density per U vs. standalone rackmount servers; Works in existing rack mount infrastructure; Works with existing hot aisle / cold aisle datacenter layout
•
Greater levels of efficiency with shared power and thermals: Greater than 7% power efficiency improvement over standalone rack servers; Power capping allows administrators to limit power consumption per system; Supports common slot power strategy - enables you to choose the right-sized power supply for your application
•
Highly configurable for different application requirements: Both LFF and SFF drive cage options for commonality with the rest of your datacenter; Four PCIe riser options enable customers to choose the optimum I/O configuration for your application; Two to four nodes can be configured per chassis.
8 MB (1 x 8 MB) Level 3 cache; 4 MB (1 x 4 MB) Level 3 cache
Чипсет
Чипсет Intel® 5520
Шина FSB процессора
Шина FSB 1333/1066/800 МГц
Стандартное ОЗУ
6 GB (3 x 2 GB) Standard Memory UDIMMs
Тип памяти
DDR3 Registered (RDIMM) и Unbuffered (UDIMM)
Слоты для памяти
16 DDR3 DIMM slots
Максимальная память
128 GB (16 x 8 GB) for Registered Memory configurations; 24 GB (12 x 2 GB) for Unbuffered Memory configurations
Встроенные приводы
Встроенные приводы
Жёсткий диск не входит в стандартную конфигурацию
Скорость привода жёсткого диска
Не применимо
Дисковод для гибких дисков
Только порт USB
Оптические приводы
DVD / CD drives via USB only
Контроллер хранилища
HP Embedded SATA RAID Controller (RAID 0, 1, 10) per server node; NOTE: Transfer rate: 3.0 Gb/s SATA; NOTE: A HP Smart Array Controller is required for SAS HDD and/or hot-plug HDD support. Transfer rate: 6.0 Gb/s SAS supported; NOTE: When adding a Smart Array Controller to an 8LFF SAS HDD configuration, a HP h1000 LFF SAS CONTROLLER CABLE OPTION KIT (P/N 519503-B21) must be ordered to connect the Smart Array Controller to the hard drive backplane. When a controller is added during a CTO buildup, the appropriate cables are included and this kit is not required. This cable kit is only needed for BTO configurations or if a CTO customer upgrades to a Smart Array Controller after initial purchase. NOTE: When adding a Smart Array Controller to an 16SFF SAS HDD configuration, a HP h1000 SFF SAS CONTROLLER CABLE OPTION KIT (P/N 519507-B21) must be ordered to connect the Smart Array Controller to the hard drive backplane. When a controller is added during a CTO buildup, the appropriate cables are included and this kit is not required. This cable kit is only needed if a CTO customer upgrades to a Smart Array Controller after initial purchase; NOTE: An external diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is needed to install storage controller drivers during a Windows operating system installation from a CD.
Гнёзда расширения
Half Height Nodes (1U): One available PCI Express Gen 2.0 slots: (standard on 4-node BTO model): Slot 1: Low profile PCI-Express 2.0 x16; Full Height Nodes (2U): three available riser options; Option 1: Up to three available PCI-Express Gen 2.0 slots: Slot 1: full-length/full-height PCI-Express 2.0 x16; Slot 2: full-length/half-height PCI-Express 2.0 x4; Slot 3: low-profile PCI-Express 2.0 x4; Option 2: Up to three available PCI-Express Gen 2.0 slots: Slot 1: full-length/full-height PCI-Express 2.0 x8; Slot 2: full-length/half-height PCI-Express 2.0 x8; Slot 3: low-profile PCI-Express 2.0 x8; Option 3: Up to two available PCI-Express Gen 2.0 slots: (standard on 2-node BTO model); Slot 1: full-length/full-height PCI-Express 2.0 x16; Slot 2: low-profile PCI-Express 2.0 x8
Характеристики системы
Форм-фактор
HP ProLiant h1000 G6 Chassis - 2U; HP ProLiant DL170h Server - Half-width server node
Функции питания
HP has a new design for ProLiant power- the new Common Slot Power Supply bay. This design provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with Common Slot, High Efficiency and Right-Size Power Supplies. The new HP Common Slot power supplies are designed for the highest power efficiency without degrading performance of the ProLiant server. Power Supplies have efficiency ratings up to 92%. There are three Right Size power options available depending on the configuration of your server. To make sure you select the correct power supply to meet your configuration, please use the HP Power Advisor at www.hp.com/go/proliant-energy-efficient" or www.hp.com/go/hppoweradvisor. All HP Common Slot power sources are UL, CE Mark Compliant, Hot Plug and Redundant.
Внешние порты ввода-вывода
Network RJ-45(Ethernet) - 2 10/100/1000 NIC ports (1 NIC shared for the HP ProLiant Lights Out 100i Remote Management); Serial - 1; Graphics - 1; USB - 3 (two rear, one internal); Management - 1 Optional Dedicated LO100i Management Port; Health LED - 1 rear per server node (Optional front health LED per server node); Power - 1 rear per server node (Optional front power button per server node); UID - 1 rear per server node (Optional front UID per chassis)
Сетевой интерфейс
HP NC362i Integrated Dual Port Gigabit Server Adapter with support for iSCSI
Совместимые операционные системы
Microsoft® Windows® Server; Microsoft® Windows® Server Hyper-V; Red Hat Enterprise Linux (RHEL); SUSE Linux Enterprise Server (SLES); Solaris 10 for x86/x64 based Systems; VMware; Citrix Essentials for XenServer
Управление безопасностью
Пароль на включение питания; пароль для настройки, Контроль загрузки с дискеты; Secure Sockets Layer (SSL); Secure Shell (SSH)
Удобство обслуживания
ProLiant 100 series Server Set-up and Deployment software tools: The HP ProLiant Easy Set-up CDs and ISO image downloads offer Assisted and Manual single server installation, setup, and deployment capability. Capabilities provided are: AutoRun; Assisted Installation Microsoft Windows 2003 Server and Microsoft Windows 2008 Server; OS and SW available for Manual Installation are listed on each servers' QuickSpecs; Array Configuration Utility (ACU); Array Diagnostics Utility (ADU); HP Insight Diagnostics; Smart Components - self-executable software consisting of drivers; HP Smart Update Manager - a single system and multi-server deployment tool for Windows environments that works with Smart Components to provide customers with easy-to-use GUI and Script-based deployment capacity; SmartStart Scripting Toolkit - an automated scalable deployment utility
Размер без упаковки (Ш x Г x В)
44.81 x 73.43 x 8.74 cm
Вес без упаковки
35.4 kg
Гарантия
1 year Parts, 1 year labor, and 1 year on-site service
