HP ProLiant BL620c Generation 7 (G7) Server Blade Carrier Grade Supplement

Processor:
One or two, Intel Xeon 7500 Series processors each up to 8 cores and 105 watts.

Memory:
Thirty-two (32) DDR-3 RDIMM slots
256GB of DDR3-1033 and DD3-1066 registered DIMMs (RDIMMs) operating up to 1066MHz.
Memory error injection

Storage Controller:
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0 and 1.
NOTE: The P410i is configured with no cache allowing the end user to select what cache option of the three different options they want (if cache is desired in the first place).
HP Smart Array P410i flash backed write cache (FBWC) options to 1GB.
Two (2) cache slots for FBWC battery options.
NOTE: The server supports up to a total of two (2) cache FBWC battery options including one added to the P410i
Internal Drive Support:
Two (2) hot-plug small form factor (SFF) drive bays
Support for SAS, and SSD hot-plug hard drives

Network Controller:
Four (4) embedded HP NC553i 10Gb FlexFabric Converged Network Adapters routed interconnect bays 1 and 2 supporting autosensing 10Gb/1Gb Ethernet, FCoE, Flex-10, TCP/IP offload engine, and hardware-based accelerated iSCSI
One (1) 10/100 network adapter dedicated to iLO 3 Management

Mezzanine Support:
Three (3) mezzanine expansion slots as follows:
Two (2) Type II (25 watts) x8 PCIe Gen2; mezzanine slots 2 and 3 supporting 4Gb and 8Gb FC, 10G FlexFabric, 10G Flex10, 10GbE, 1GbEand the PCI Pass-thru Expansion card.
One (1) Type I (15 watts) x4 PCIe Gen2; mezzanine slot 1 supporting 4Gb and 8Gb FC, 1GbE

Expansion Blade Support:
Up to two HP BladeSystem Expansion Blades (PCI Expansion Blade) are supported using the HP PCI Expansion Pass-thru mezzanine Card. One HP PCI Express Mezzanine Pass-Thru Card is required per Expansion Blade.
NOTE: The PCI Express Mezzanine Pass-Thru Card(s) must be installed in mezzanine slots 2 and/or 3.

Internal USB and SD Support (Not NEBS tested):
One (1) internal USB 2.0 connector for USB flash media drive keys
One (1) internal micro secure digital high capacity (SDHC) card slot for planned future use
Trusted Platform Module (Not NEBS tested)
One (1) internal TPM 1.2 module connector

Infrastructure Management:
HP Integrated Lights-Out 3 (iLO 3) management processor for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's changing business requirements.

Operating System Support:
Microsoft Windows, RHEL, SLES, OEL, VMware, and Citrix XenServer

Form Factor:
Full height, single wide server blade that plugs into the HP BladeSystem c7000 enclosures

Carrier Grade Enclosure:
The Carrier Grade HP BladeSystem c7000 rack enclosure is 11U high and holds up to 8 HP ProLiant BL620c G7 servers plugged vertically.